Cutted out the ailerons, made a 45 degree bevel on the aileron ans also a little bit on the wing side. Then putted it together with Tesa extra strong tape. Forgot to make pictures but this is no rocket science.… Continue Reading
For the sidespars i also use 4mm round plywood. I made a gutter of 3mm so it is a tight fit. Also filled it with construction glue and inserted the wooden spars. So mow the main wing has all the… Continue Reading
I removed the baking paper from the bottom and that is workin so easy… The glue is spread a bit but i can sand that away if it anoys me. And on the top you can see the spar is… Continue Reading
I cutted a slot of 3mm wide for the main spar. Now i will apply baking paper on the bottom and secure it with packong tape which also will keep the gap tight. Now the baking paper is in place… Continue Reading
Cutted the main wing from 6mm Depron. And i will use 4mm round plywood instead of Carbon. Why? Because i could not get carbon spars within 24h and you can buy this almost everywhere. Costs: 1 meter, 4mm diameter. 0,65… Continue Reading