The A-panel
Everyone knows this, if it looks bad on the outside… be prepared for the inside.
Front replacement
Rear Panel maintenance needed
Our purple mini that is used as a daily drive needs some serious attention now. Postponed it already for a few years but now foglight fell of it was a sign that something really needs to be done. I bought… Continue Reading
Fried Turnigy 9X due reversed polarity
Someone who just started in this hobby asked my advice what to buy with a small budget. So when they finally received the goods they connected the lipo badly and released all the magic smoke out of the turnigy 9X.
What’s in the box?
I bought the DIY kit version and it arrived very quick. I put a Zippy 3S 1000 next to it for a reference. It is a nice compact box, let’s see what’s in it.
Hype Pitts special rudder repair
Rudder is bad, so repair needed. During taxiing on the runway the tailwheel came loose… Let’s fix it!
Mobius powered by ESC ubec
Because The Mobius battery is to small for recording hours of fun I decided to power it by USB input. But I don’t like the loose and fragile USB connector I decided to solder the wires direct internally. The wires… Continue Reading
Configure Mobius without GUI
Because my Mobius is pretty beaten up, the USB port can only be used for charging. So how to change settings? 1. Disconnect the camera from the PC and turn it off. 2. Press and Hold Down the Mode… Continue Reading
Install WiFi USB Dongle
First start with updating and upgrading your OS => post The use the following commands: :-$ connmanctl connmanctl> technologies connmanctl> enable wifi Likely it will say “Error wifi: Already enabled” connmanctl> scan wifi connmanctl> agent on connmanctl> services A list with available WiFi… Continue Reading
Find Network Mac Address
To find the MAC address of your Pi’s NetworkCard enter the following command: :~$ cat /sys/class/net/eth0/address